GW Weapon Masters and Wreckers

 I just finished the weapons masters from this GW Necromunda set.  I went with a slightly more colourful scheme than the GW artist did, but I still wanted them to look at least somewhat grimy.

 With some of the photos I tried to take the white background out (you can see how lame I am at it), but I didn't bother with all of them. 

The first one is the hammer guy.  I had trouble figuring out what his mask was meant to look like - I'm not too happy about that.  I am particularly happy with the hammer head - especially how it came out under the light.  I wanted it to look metallic but also dented and dirty.  I think I did a decent job of it.  The arms look much more gold-y in some of the photos and much more bronze-y in others.  The reality is that they are quite a browny-bronze.  I love the sculpt of them, with the believable exposed hinges.



The second one is the cylinder-cartridge rifle guy.  I went with Mechrite Red for him, mixed with a Vallejo German Black-Brown camo to shade (similar to GW Dryad Bark) and Ice Yellow to highlight.  I wanted to minimise the use of black and white because to try and get a grubby brown overall look. 

It took a while to figure out what was going on with his mask, but the rest seemed fairly obvious what it was.  Until I looked at the photos, I hadn't noticed the accidental blob of grey on his boot. >_<  

Never mind.








Comments

Post a Comment

Popular posts from this blog

Micro:Bit and SPI display

I want to explore the full potential of the BBC Micro:bits my school has. Making rock-paper-scissors games and the like is all well and good, and the students love it (for the most part), but it always feels a little bit gimmicky.  But when students really get engaged and suggest ideas for them (e.g. games, compass display), it all gets a little bit cramped and feels like it could  kinda  work, but not really . Then I found out that all the tiny strips on the edge are actually GPIO pins, not just the fat 0, 1 and 2 ones.  Since then, I've wanted to explore what I can do with it. Hence, over the last few days I have been trying to get the microbit to control a TFT display. I first went for this 2.4" display with a touchscreen.  The SPI interface is just for the microSD, not for the screen but I didn't think that would be a problem because the micro:bit has so many pins.  After much frustration, I discovered that there are many of the pins you can't reliabl...
Read more

DCS World with TrackIR under Ubuntu

This is a record of my experience of setting this up.  It's meant more as a record for my future self than a tutorial, but maybe somebody will find it useful. 1 - Install DCS First step, install DCS World via the Steam client as normal.  2 - Install LinuxTrack Linuxtrack Download here: https://github.com/uglyDwarf/linuxtrack/wiki/Downloads   Instructions here: https://github.com/uglyDwarf/linuxtrack/wiki/universal-Linuxtrack-package   Using the gui (ltr_gui) requires qt4 libraries, which I could not find in my standard Ubuntu repositories, so I had to use the ppa instructions here: https://ubuntuhandbook.org/index.php/2020/07/install-qt4-ubuntu-20-04 Run ltr_gui from linuxtrack's bin directory to check everything works so far before moving on to get it running under Proton.  3 - Install LinuxTrack into the DCS World prefix NOTE: Attempting to install for Wine games WON'T WORK e.g. here https://github-wiki-see.page/m/uglyDwarf/linuxtrack/wiki/Wine-Games   Th...
Read more

Polygon Triangulator!!

For my 3D games, I've been playing around with ideas around semi-procedural geometry, by which I mean geometry which is generated from a small amount of authored data.  For example, I could draw out the shape of an island in a dozen or so 3D points, and the actual terrain geometry could be generated from that. A big step along the way to that is splitting up a non-convex polygon into triangles.  The triangles mustn't overlap, nor must they cover any space which the polygon itself doesn't cover.  For example, this diagram . Today, I managed to get a python program* running which took a list of 2D points defining a polygon, split it into sub-triangles and displayed them in a tkinter canvas**. I am certain this has been solved by clever people in much better ways, but I still feel proud to have figured this one out (and I haven't managed to break it yet!). The basic algorithm is: Create a temporary copy of the polygon points list start with the three points fro...
Read more