Stability issues with R8168 network driver

Fix here: http://ubuntuforums.org/showthread.php?t=1861865

Comments

Post a Comment

Popular posts from this blog

DCS World with TrackIR under Ubuntu

This is a record of my experience of setting this up.  It's meant more as a record for my future self than a tutorial, but maybe somebody will find it useful. 1 - Install DCS First step, install DCS World via the Steam client as normal.  2 - Install LinuxTrack Linuxtrack Download here: https://github.com/uglyDwarf/linuxtrack/wiki/Downloads   Instructions here: https://github.com/uglyDwarf/linuxtrack/wiki/universal-Linuxtrack-package   Using the gui (ltr_gui) requires qt4 libraries, which I could not find in my standard Ubuntu repositories, so I had to use the ppa instructions here: https://ubuntuhandbook.org/index.php/2020/07/install-qt4-ubuntu-20-04 Run ltr_gui from linuxtrack's bin directory to check everything works so far before moving on to get it running under Proton.  3 - Install LinuxTrack into the DCS World prefix NOTE: Attempting to install for Wine games WON'T WORK e.g. here https://github-wiki-see.page/m/uglyDwarf/linuxtrack/wiki/Wine-Games   Th...
Read more

Micro:Bit and SPI display

I want to explore the full potential of the BBC Micro:bits my school has. Making rock-paper-scissors games and the like is all well and good, and the students love it (for the most part), but it always feels a little bit gimmicky.  But when students really get engaged and suggest ideas for them (e.g. games, compass display), it all gets a little bit cramped and feels like it could  kinda  work, but not really . Then I found out that all the tiny strips on the edge are actually GPIO pins, not just the fat 0, 1 and 2 ones.  Since then, I've wanted to explore what I can do with it. Hence, over the last few days I have been trying to get the microbit to control a TFT display. I first went for this 2.4" display with a touchscreen.  The SPI interface is just for the microSD, not for the screen but I didn't think that would be a problem because the micro:bit has so many pins.  After much frustration, I discovered that there are many of the pins you can't reliabl...
Read more

DIY Luggable Pentium

Image
 Ages ago, I bought a Socket 5 Pentium via Ebay.  I had mounted it in a DIY wooden case just so I could use it, but it was always a bit of a pain to fish out a 4:3 monitor, PS/2 keyboard and mouse and connect it all up. So for a long, long while I have had the idea of making it into a 'luggable' machine.  Finally today, I have made it a reality.   I had an ancient monitor kicking around that ran off a 12V input and I had tested powering it from an ATX PSU.  I dismantled it with the idea of using it for video and audio.  Unfortunately while removing it from its case, I managed to damage the cable connection for the speakers, so then I had to dig out an old speaker from a box of scrap. Annoyingly, this motherboard did not have an amplified output - only a line out.  So I bought a cheap amplifier module that works off 5V so I could power it off the PSU's 5V line.  This has led to an annoying amount of noise in the output - I suspect from the PSU. The...
Read more